Enhanced

Enhanced
Citrus Solvent

alt text
alt text

ORANGE-SOL ENHANCED
4265432 oz: 12 x 32 oz • 115 Cs/pallet • Cs: 25 lbs
426561 Gal: 4 x 1 Gal • 60 Cs/pallet • Cs: 30 lbs
426575 Gal: 1 x 5 Gal • 48/pallet • Ea: 40 lbs
4265855 Gal: 1 x 55 Gal • 4/pallet • Ea wt: 497 lbs
42659330 Gal Tote: 1 x 330 Gal • Ea: 2700 lbs

Product Description +

ORANGE-SOL Enhanced is a superior performing, non-toxic industrial strength cleaning agent for use where heavy-duty degreasing, ink, paint, adhesive and petroleum related removal and high solvency is desired. Contains 100% active ingredients and no water. Reliable supply, product quality and economy.

Features / Benefits +

· Contains no water, only 100% active ingredients
· High dielectric strength >50,000 volts · Non-flammable
· Biodegradable · Non-toxic · No harmful vapors
· Can be used in dip tanks or by pouring and wiping on
· Product is non-toxic and user safe. Reduces costs for protective clothing, hazardous material handling, medical surveillance while surpassing high environmental regulatory standards.

Applications +

Powerful solvent and penetrant for tough-to-remove asphaltic compounds including, but not limited to:
· Automotive paints · Acrylic-base inks
· Solvent-base inks · Soy inks
· Solvent-base paints & lacquers
· Un-cured/parially-cured UV inks
· Asphalt · Adhesives · Permanent marker
· Waxy residue • Tar

How to Use +

ORANGE-SOL Enhanced is 100% active ingredients and contains no water, use full-strength, do not dilute. Check for compatibility prior to use.
General Use: Pour, spray, wipe to problem area. Allow sufficient time for product to penetrate (penetration time will vary with different applications); Wipe off, air- knife, or rinse with clear water, for residue-free surface(s)

Surface Compatibility +

Enhanced is surface friendly and substrate compatible for most water tolerant surfaces. Not be compatible with painted surfaces, EPDM, butyl and styrene products. A small test patch in an inconspicuous area is recommended if unsure of compatibility.
Safe for use on:
· Hard-rubber rollers (wipe only)
· Anilox rollers · Metals · Chrome
· Concrete · Brick · Glass
· N-clad screen fabric · Ceramics
· Paint booths · Stainless steel
· Silk-screen fabric · Fiberglass
DO NOT USE ON:
· Some fabric · Styrene
· Rubber (Butyl, EPDM, Natural)
· Non-water safe surfaces
· Painted surfaces

Physical Properties +

Flash Point: 144° F (62.22° C) PMCC, ASTM D-93.
Appearance: Clear amber liquid.
Odor: Light citrus.
Weight per Gallon: 7.13 lbs/gal
Specific Gravity: .854
Evaporation Rate: (BuAc=1) <1.
pH Value: None
Solubility in Water: Easily soluble in water.
Flammability: Non-flammable.

Product safety information required for this product is not included herein. Before handling, read safety data sheet (SDS) and container label for safe use, physical and health hazard information.

SDS Request +

The safety data sheet (SDS) is available by emailing ORANGE-SOL direct.